We check the instruction manual to fulfil the requirements of Annex “VII” concerning essential health and safety relating to the design and construction of machinery according to 1.7.4.2 Contents of the instructions of the Machinery Directive 2006/42/EC

Each instruction manual must contain, where applicable, at least the following information:

  1. the business name and full address of the manufacturer and of his authorised representative;
  2. the designation of the machinery as marked on the machinery itself, except for the serial number (see section 1.7.3);
  3. the EC declaration of conformity, or a document setting out the contents of the EC declaration of conformity, showing the particulars of the machinery, not necessarily including the serial number and the signature;
  4. a general description of the machinery;
  5. the drawings, diagrams, descriptions and explanations necessary for the use, maintenance and repair of the machinery and for checking its correct functioning;
  6. a description of the workstation(s) likely to be occupied by operators;
  7. a description of the intended use of the machinery;
  8. warnings concerning ways in which the machinery must not be used that experience has shown might occur;
  9. assembly, installation and connection instructions, including drawings, diagrams and the means of attachment and the designation of the chassis or installation on which the machinery is to be mounted;
  10. instructions relating to installation and assembly for reducing noise or vibration;
  11. instructions for the putting into service and use of the machinery and, if necessary, instructions for the training of operators;
  12. information about the residual risks that remain despite the inherent safe design measures, safeguarding and complementary protective measures adopted;
  13. instructions on the protective measures to be taken by the user, including, where appropriate, the personal protective equipment to be provided;
  14. the essential characteristics of tools which may be fitted to the machinery;
  15. the conditions in which the machinery meets the requirement of stability during use, transportation, assembly,
  16. dismantling when out of service, testing or foreseeable breakdowns;
  17. instructions with a view to ensuring that transport, handling and storage operations can be made safely, giving the mass of the machinery and of its various parts where these are regularly to be transported separately;
  18. the operating method to be followed in the event of accident or breakdown; if a blockage is likely to occur, the operating method to be followed so as to enable the equipment to be safely unblocked; L 157/48 EN Official Journal of the European Union 9.6.2006
  19. the description of the adjustment and maintenance operations that should be carried out by the user and the preventive maintenance measures that should be observed;
  20. instructions designed to enable adjustment and maintenance to be carried out safely, including the protective measures that should be taken during these operations;
  21. the specifications of the spare parts to be used, when these affect the health and safety of operators;
  22. the following information on airborne noise emissions:
    • the A-weighted emission sound pressure level at workstations, where this exceeds 70 dB(A); where this level does not exceed 70 dB(A), this fact must be indicated,
    • the peak C-weighted instantaneous sound pressure value at workstations, where this exceeds 63 Pa (130 dB in relation to 20 μPa),

the A-weighted sound power level emitted by the machinery, where the A-weighted emission sound pressure level at workstations exceeds 80 dB(A).